there is allot of … there is allot of stupid people here. everyone knows and even the professionals the best racers cleaning trick is to spray the entire car down with "EASY OFF" its a household cleaner you can buy from any grocery store. it will degrease better then anything. then just wipe away! now you have a perfectly degreased car.
why are all you … why are all you guys marking this guy down? the tiniest spec of dust will lower the life of the engine. always use compressed air and blow out the cooling head before taking out the glo plug also.
Some advice here is … Some advice here is right, and some wrong.
This is how I clean my engines, with expertise;
(make sure the engine's cold before doing this)
While the plug's still in, spray down some de-greaser into the head. Let sit for 1 min, then spray out residue/gunk/grime with compressed air, THUROUGHLY wipe CLEAN.
To PROPERLY lube and maintain the engine after each run; unscrew plug, put 4 drops of after run-oil into the engine + 3 in carb. Turn engine around a few times and it's ready for storage.
First off: WD40 … First off: WD40 does no harm what so ever to the engine. It lubricates and keeps rust away. Read upon the facts before you post crap.
A bunch of racers use WD40 as a part of their engine-maintenance. Again; understand what WD40 is.
Secondly: (cold motor) while the glowplug's still in, spray down the top (around the plug) with f.instance WD40. Blast it out with compressed air, wipe dry. That's the PROPER way to clean out the head.
stupid dont … stupid dont spray with the glow plug off u dont want that crap in the head, put after oil in head glow plug back on then spray the heat sink. idiot newbs!
ye i need to stfu … ye i need to stfu so u can teach all morons how to DESTORY A NITRO…. go hang your self total loser….. and for your info u should be happy u a us tit and not from nl i would have loved to spend 2 hours to beat the living outa u…………. to bad us is 18 hours away from nl -_- onsider your self lucky CHILD……
then after u did … then after u did this u can take the glowplug out and clean whatever is left in there. but make sure there is no DIRT/SAND around the glowplug. and rubbing your car whit a napkin wont clean it u a total moron :s dont try be something uy aint u should be hanged for showing this to newbees. they will do as u said and rub around 297392739 sand grains in to the cilinder… GG MORON!.
people DO NOT DO … people DO NOT DO WHAT HE DOEs he removes the plug and then tries to clean the heatsink!!!
this moron doesnt know what he is doing most nitros will have loads of dirt in the glowplugs and remove it ONLY MAKES SURE ALL THAT DIRTY WILL FALL INTO YOUR CILINDER!!!! and trust me u dont want this… so please do ya self a favour and forget u ever saw this video. and dont go RUBBING THE DIRTY IN THE CILINDER AS HE DOES… u can leave the glowplug in and get a compresor and blast it clean whit air.
this is so wrong … this is so wrong use nitroblast WD40 is not made for RCs and to clean the car use motorspray on a paper tower to clean off all the dirt and grim
cleaning a sportwerks mini
Comments on how to clean a nitro rc car »
rofl sounds like a …
rofl sounds like a guy who hasn't dropped his balls lmao
there is allot of …
there is allot of stupid people here. everyone knows and even the professionals the best racers cleaning trick is to spray the entire car down with "EASY OFF" its a household cleaner you can buy from any grocery store. it will degrease better then anything. then just wipe away! now you have a perfectly degreased car.
why are all you …
why are all you guys marking this guy down? the tiniest spec of dust will lower the life of the engine. always use compressed air and blow out the cooling head before taking out the glo plug also.
ive had my chaos …
ive had my chaos for a few months and im thinking about upgrading the engine to a .08 or .09 wat do you chaos owners think?
Winks i have it too …
Winks i have it too ^_^
its a 1/16 i have it
its a 1/16 i have it
an 18th scale …
an 18th scale because its a more popular class which may mean easier parts
is that the 1/16th …
is that the 1/16th or 1/18th would you recomend 1 please reply
if u want to know …
if u want to know how to work on an rc car y not just go to a race theres lots of helpful people there like me lol
guy, i hope ur pul …
guy, i hope ur pul starter breaks, because u rap it on to hard
Some advice here is …
Some advice here is right, and some wrong.
This is how I clean my engines, with expertise;
(make sure the engine's cold before doing this)
While the plug's still in, spray down some de-greaser into the head. Let sit for 1 min, then spray out residue/gunk/grime with compressed air, THUROUGHLY wipe CLEAN.
To PROPERLY lube and maintain the engine after each run; unscrew plug, put 4 drops of after run-oil into the engine + 3 in carb. Turn engine around a few times and it's ready for storage.
First off: WD40 …
First off: WD40 does no harm what so ever to the engine. It lubricates and keeps rust away. Read upon the facts before you post crap.
A bunch of racers use WD40 as a part of their engine-maintenance. Again; understand what WD40 is.
Secondly: (cold motor) while the glowplug's still in, spray down the top (around the plug) with f.instance WD40. Blast it out with compressed air, wipe dry. That's the PROPER way to clean out the head.
stupid dont …
stupid dont spray with the glow plug off u dont want that crap in the head, put after oil in head glow plug back on then spray the heat sink. idiot newbs!
levian, leave him …
levian, leave him alone hes only trying to help. its not a bad vid.
ye i need to stfu …
ye i need to stfu so u can teach all morons how to DESTORY A NITRO…. go hang your self total loser….. and for your info u should be happy u a us tit and not from nl i would have loved to spend 2 hours to beat the living outa u…………. to bad us is 18 hours away from nl -_- onsider your self lucky CHILD……
u need to shut the …
u need to shut the up
ps u sound like a …
ps u sound like a lil 11 year old tit…. u dont look like one tho balls didnt drop yet or still vergin……….
then after u did …
then after u did this u can take the glowplug out and clean whatever is left in there. but make sure there is no DIRT/SAND around the glowplug. and rubbing your car whit a napkin wont clean it u a total moron :s dont try be something uy aint u should be hanged for showing this to newbees. they will do as u said and rub around 297392739 sand grains in to the cilinder… GG MORON!.
people DO NOT DO …
people DO NOT DO WHAT HE DOEs he removes the plug and then tries to clean the heatsink!!!
this moron doesnt know what he is doing most nitros will have loads of dirt in the glowplugs and remove it ONLY MAKES SURE ALL THAT DIRTY WILL FALL INTO YOUR CILINDER!!!! and trust me u dont want this… so please do ya self a favour and forget u ever saw this video. and dont go RUBBING THE DIRTY IN THE CILINDER AS HE DOES… u can leave the glowplug in and get a compresor and blast it clean whit air.
this is so wrong …
this is so wrong use nitroblast WD40 is not made for RCs and to clean the car use motorspray on a paper tower to clean off all the dirt and grim
Whoa!!
now I'm …
Whoa!!
now I'm confused =@
what should I use wd40 or after run??
I'm getting mixxed info =/ people say that wd40 will eventually kill your engine and now i hear some say after run oit is better =/
i want that other …
i want that other dude to shut the up lol
is a sportwerks …
is a sportwerks chaos good is it reliable,fast,worth buying?? as i think they are good n i myt buy 1
That hobby shop …
That hobby shop must SUCK !!
for all that watch …
for all that watch this video read your manual because most the things you have said are wrong!